logobeta
본 영문본은 리걸엔진의 AI 번역 엔진으로 번역되었습니다. 수정이 필요한 부분이 있는 경우 피드백 부탁드립니다.
텍스트 조절
arrow
arrow
(영문) 창원지방법원 2017.05.19 2016고단1473
수질및수생태계보전에관한법률위반
Text

Defendants shall be punished by a fine of three million won.

Defendant

If A does not pay the above fine, 100,000.

Reasons

Punishment of the crime

Defendant

A is the representative director of the (State)B in the window D of Changwon-si, and the defendant (State)B is a corporation established for the purpose of bending manufacturing business.

It is difficult to maintain environmental standards due to water pollutants discharged from discharge facilities in the upper region of the water source protection area, special measures area and the upper region of the special measures area, areas where water intake facilities are installed, and the upper region of the water source protection area, or there is a

The Minister of Environment may not install emission facilities discharging specific water-quality harmful substances in an area designated as "area subject to the restriction on the installation of emission facilities", and a person who intends to install other emission facilities shall obtain permission from the Minister of Environment as prescribed by Presidential Decree.

1. From April 7, 2014 to March 24, 2016, Defendant A, the Minister of Environment, at the window D of Changwon-si, designated as an area subject to the restriction on the installation of wastewater discharging facilities from the river basin under the river basin, Defendant A, without obtaining permission for the installation of wastewater discharging facilities, and limited the installation of wastewater discharging facilities by discharging specific water quality more than the standard concentration. However, Defendant A installed four half of the CNC line (0.24 cubic meters of the storage capacity of 0.432 cubic meters of the storage capacity of 0.432 cubic meters of the storage capacity of cNC) and four parts of the CNC line processing machine (0.432 cubic meters of the storage capacity of c.

2. The Defendant (State) set up four parts of the CNC Line Line (0.24 cubic metres 0.24 cubic metres) and four parts of the CNC processing unit (0.432 metres metres 0.432 metres) without obtaining permission to install wastewater discharge facilities as above in relation to the business of the person to be avoided at the same time and place as in the preceding paragraph.

Summary of Evidence

1. Each legal statement of witness E and F;

1. Recording notes of each witness examination (G, E);

1. Prosecution A against Defendant A.

arrow