beta
Text
1. The defendant's KRW 32,66,362 as well as 5% per annum from April 22, 2020 to November 24, 2020 to the plaintiff.
Reasons
1. Facts of recognition;
A. On March 13, 2019, the Defendant entered into a lease agreement with Gyeongbuk-gun D (hereinafter “instant factory”) with the Defendant during the period from March 13, 2021 to March 13, 2021 (hereinafter “E”) and operated a metal processing factory under the trade name “E” at this place. (B) On May 15, 2019, the Plaintiff is an insurance company which entered into an insurance contract with Nonparty C, the owner of the instant factory, and the owner of the instant factory, with the content of guaranteeing fire damage.
C. On March 11, 2020, around 17:51, 202, a fire occurred in the plant of this case, and “the fire of this case” refers to “the fire of this case.”
18:57 was advanced, and a fire site investigation report which was investigated and prepared by a fire station twice through two times is included as follows:
-
2. Grounds for fire investigation: The internal fire phenomenon caused by a fire on the first floor of a factory shall be observed from the floor surface to be the wall, upper ceiling, and the contact and electric wires are somewhat fireed at the point adjacent to the floor presumed to have first fire, but it is difficult to find out evidence, such as a slide, which can be specified as electrical factors, and the fact that there is only one point in writing at the site, but it is also unclear that there is unclearness and uncertainty of human corrosion, etc.
7.Instring the fire site and identification photo nO 4, observation of the setting-off of a screener at the time of outbreak - presumption of the front line transit at the time of outbreak -
9. Electrical factors examining the causes of fire: The reason why the blocking machine is set, such as the observation of the state of set-off of the blocking machine, but the state of setting-off is good, and the situation of setting-off is good, and no electrical evidence is discovered, such as setting-off electric wires and contact straws, racks, racks, etc., at the location of the contact unit.