Defendant shall be punished by imprisonment without prison labor for eight months.

However, the execution of the above punishment shall be suspended for two years from the date this judgment becomes final and conclusive.

Punishment of the crime

The defendant, in relation to the factory extension construction work of "C" in Kimhae-si and "C", is a person who has been subcontracted with the work of attaching iron bars to the steel frame of the above factory from the present construction, and is engaged in the work of overall supervision and direction of the above work, and the victim D (46) is a person who performs the work under the direction of the defendant.

At around 14:00 on December 8, 2016, the Defendant attached a steel plate (not less than 9m, 1m in height, 125m in thickness) to an existing structure that connects the beam of H beam of the existing structure for the factory extension of the above company.

At the time, the victim was placed on the top of the sn beam beam of the sn beam beam line to connect the steel board. At the same time, two electric poles with the flow of high voltages are located, and there are two electric wires and work site outer walls connected to the electric poles or facilities attached to the electric poles and the electric poles (the distance between electric poles and outer walls: about 1m: about 50cm between the electric poles and the outer walls, about 90cm between the electric lines and the outer walls): therefore, there was a duty of care in the course of work, such as providing the blocking facilities of electric wires and other wires or safety devices to prevent the fall.

Nevertheless, the Defendant neglected to install the blocking facilities, etc. to prevent electric shock, and did not provide the safety bells (slocks connected to the safety bells and the surrounding fixed units) connected to the safety bells (slocks) and the safety bells (slocks connected to the safety bells) connected to the safety bells (slocks) to prevent the fall, etc. in the surrounding fixed units, and had the H beam beams at a height of 9 meters for the victim mixed with the safety device at the bottom of the victim. As a result, the damaged person touchs the electric caution facilities during the work.