The defendant's appeal is dismissed.

1. The decision of the court below which found the defendant guilty of the facts charged of this case was erroneous by misunderstanding the facts and adversely affecting the conclusion of the judgment, although the defendant did not neglect to exercise occupational care while conducting the internal examination of the office of directors.

2. Determination

A. One of the serious mergers by the internal border test conducted in the ledger is a tent, which is known to the extent of 0.2 to 0.4% of the frequency of the long-term factory laboratory, and the danger of the long-term factory laboratory will increase if the movement by the Minister is resisted. 2) The long-term factory unit can be divided into mechanical engineering and air pressure 2 kinds. The mechanical factory unit is generated by the end of the internal border border, which is the implementation department of the workplace SP and SPP, and the air pressure of the Minister at the time of the inspection, and the air pressure of the air-tension factory unit is high, which is generated from vulnerable parts, such as chromatic damage and cancer, and in particular, the heart commander, the heart commander, and the heart commander.

3) In particular, if the inner diameter is adjacent to the inner diameter, the wall is protruding fast by the inner diameter, and the inner diameter is protruding, and if the inner diameter is proceeding, it is changed in white and is immediately preceding to the astronomical length. If a sudden operation is made without recognizing these changes in the phase, a doctor is obliged to take careful measures from the beginning to the end of the internal diameter operation, check one side of the internal diameter, check one side, conduct the operation, check one direction of the minister, conduct the operation, and check the direction of the internal diameter as close as close as above. 4) In order to prevent the internal diameter from being carried out, a prosecutor is obliged to take measures for inserting the internal diameter as soon as possible.