Defendant

A Co., Ltd. shall be punished by a fine of 10,00,000 won, and Defendant B shall be punished by imprisonment for one year.

except that this judgment.

Punishment of the crime

Defendant

A Co., Ltd. is a corporation established for the purpose of civil engineering, construction work, etc. in Chungcheongbuk-gun E, and Defendant B is a representative director of Defendant A, who is in general charge of work instruction, safety and health management, etc. for employees under his control.

1. Defendant B

(a) A business owner engaged in the violation of the Occupational Safety and Health Act and occupational injury, death, etc. shall require workers to wear protective devices, such as heat resistant clothes, heat resistant locks, and protective protective outfits, etc., in order to prevent explosion of water, vapors, etc., after checking whether there is water or dangerous substances, etc., in order to prevent explosion of water, vapors, etc., and to ensure that workers are obliged to wear protective devices, such as heat resistant clothes, heat resistant locks, and protective outfits, etc., at a place where the business owner engages in handling large amounts of high heats

Nevertheless, at around 05:12 on April 9, 2013, the Defendant, at the place of business A, had the victim F, put in an Aluminium with an an aluminium, and did not pay a heat uniform to the victim, and did not verify whether the part was included in the input material, etc., and caused the victim's death by failure to implement the above measures due to the occurrence of underwater steam explosion in the an aluminium in an aluminium by negligence, such as failing to confirm whether the part was included in the input material, etc.

(b) A business owner violating the Occupational Safety and Health Act shall install a cover, etc. on the parts where workers are likely to face danger, such as motors, power-driven axis, fishing, fluor, fluor, bell, and chain of machinery, and where he/she handles containers, such as gas, etc. used in contact with, or heating of metal, he/she shall ensure that the container does not pose danger, and where there is a concern that workers might face danger by turning off on the part of the machinery, such as signal, transmission wind, etc., he/she shall install a net, sounding, etc. on the relevant part;