beta
Text
Defendant
A In six months of imprisonment, Defendant C shall be sentenced to imprisonment without prison labor for six months, and Defendant B shall be sentenced to a fine of KRW 3,000,000.
Reasons
Punishment of the crime
Defendant A is the representative director of B corporation in Ulsan-gun Group E, Ulsan-gun, and Defendant B is the corporation established for the purpose of manufacturing machinery and equipment.
1. Defendant A
(a) Where a business owner who violates Article 66-2 of the Occupational Safety and Health Act engages in the work of loading, unloading, transportation, machinery, etc., he/she shall conduct a prior investigation into the relevant work, the topography, ground level, and ground level in the relevant place of work in order to prevent any danger to workers, and record and keep the results thereof; shall prepare a work plan in consideration of the results of such investigation; and shall comply with the measures to be taken, such as, if the driver of a vehicle train, loading and unloading transportation machinery, or construction machinery mooring deserts his/her driver's location, he/she shall stop the motor to the relevant driver; and if the driver of a vehicle leaves his/her driver's seat, he/she shall take measures to prevent any sudden traffic or escape, such as separation of the driver's seat from the
On June 12, 2014, around 05:53, the Defendant had F (F) who is a foreign worker at the steel cutting plant of the said B Co., Ltd., Ltd., using 30 tons of iron plates (Ch. 580 kilograms), cut and cut on the cutting machine using 30 tons of iron plates, and let 7 tons of the cut steel plates transport the cut steel products to the loading place using 7 tons of construction machinery.
The Defendant did not prepare a work plan to prevent risks, such as narrow exploitation, etc., but did not require the said worker F to take measures, such as: (a) stop the said worker F from leaving a driving position; and (b) taking measures to prevent sudden driving or escaping from the driving zone, such as making the buck clear; or (c) separating the starting knife from the driving zone.
As a result, the worker F was engaged in the work of moving the iron plate to another lane.