A. The Plaintiffs acquired each of the real estate listed in the separate sheet No. 1 (hereinafter “each of the instant real estate”) on the date of acquisition of each ownership listed in the same list, and owned or owned each of the instant real estate until the date of closing argument.

The defendant is a corporation established for the purpose of power generation, transmission, transformation, distribution, and business related thereto.

B. On the ground of each of the instant real property, 22,90V special high voltage processing wires installed by the Defendant (hereinafter “instant electric wires”).

From August 13, 2009, the Defendant installed the instant electric wires on each of the instant real property on the ground before the closing date, and manages them by the closing date of argument.

[Reasons for Recognition] Unsatisfy, Gap evidence 1 (including virtual number), the purport of the whole pleadings

2. Relevant provisions;

A. According to Article 67(1) of the Electric Utility Act, the Minister of Trade, Industry and Energy shall establish and publicly notify the technical standards necessary for the safety management of electric installations.

Article 43 of the Enforcement Decree of the same Act provides that “The standards under Article 67 of the same Act shall not harm or damage persons or other objects (paragraph 1), and shall meet the standards that do not cause electrical or self-harm to the function of other electrical installations or other objects (paragraph 2). Accordingly, Article 4 of the standards for the technical standards of electrical installations publicly notified based on the foregoing, is determined to be in conformity with the standards for the standards for the technical standards of electrical facilities approved by the Minister of Trade, Industry and Energy when complying with the standards for the

(b) Article 135(4) of the criteria for the determination of the standards for the technical standards for electric installations refers to a tent, columns, walls, etc. constituting a special high-tension processing cable and a structure structure when a special high-tension processing cable, which exceeds 15,00 V and is below 25,00 V, approaches to a structure.

The separation distance between different countries is set as follows:

The type of electric wires in the form of lighting access to a structure.