beta
(영문) 부산지방법원 2019.08.22 2019고정775

산업안전보건법위반

Text

Defendant

A shall be punished by a fine for negligence of KRW 1,500,000, and by a fine of KRW 2,000,000.

Defendant

A above.

Reasons

Punishment of the crime

Defendant

B A corporation is a corporation established on March 25, 199 for the purpose of construction business, etc. with its head office in Busan Jin-gu, Busan and the "E Corporation" located in Busan-gu D is equivalent to 4.85 billion won in its construction cost, and Defendant A is a person in charge of safety and health management who is ordered as the head of the site of the new construction site from March 19, 2018 and actually exercises overall control over and manages matters concerning safety and health of its employees after entering the corporation B on August 7, 2017.

1. Defendant A violated the following safety measures obligation on March 4, 2019. A

In the case of dealing with containers of gas, etc. used in the contact, cutting, or heating of metal, it should be ensured that there is no danger of ion, but it should not take measures to prevent ion on gas containers located around the first floor lifts.

B. In the case of installing a safety rail, an intermediate railer should be installed in the middle of upper rail lines and floor surface, but the middle railer was not installed in the width of 3 meters located on the 6th floor above ground and in the length of 3 meters in length at a long-term material entry room.

(c) In the case of installing a network for the prevention of falling water, it was installed every 10 meters high or less, but the network for the prevention of falling water was not installed at intervals of 10 meters between the second and nine floors above ground.

Safety distress shall be installed in the aspect of open stairs with a height of not less than 1m.

Safety risks were not installed on the corridor stairs of not less than 1m between the first floor and the first floor above the ground.

(e) At a place where workers might fall down as the end or opening of a work plate and passage, protective measures, such as safety rails, fences, vertical crashs, or covers, shall be installed in such a way as not to fall down or fall. In the case of installing a cover, it shall be installed so as not to fall down or fall, but the end of the opening part of the first floor machinery parking lot on the ground, the end of the elevator opening part on the ground 1-9 floors, and the end of the elevator opening part on the ground 2-8 floors on the ground;